BDXNZ - S100,PART C,CLEARING AGENT B FOR W&S TEST

  • MSDS: BDXNZ
  • Manufacturer: THE GERIN CORP
  • Product Name: S100,PART C,CLEARING AGENT B FOR W&S TEST
  • National Stock Number: 6630-00-399-2971
Product Identification

Product ID:S100,PART C,CLEARING AGENT B FOR W&S TEST
MSDS Date:01/01/1987
FSC:6630
NIIN:00-399-2971
Kit Part:Y
MSDS Number: BDXNZ

Responsible Party
THE GERIN CORPORATION
1109 SEVENTH AVE
NEPTUNE, NJ 07753-5143
US

Cage: KO588

Contractor
THE GERIN CORPORATION
NEPTUNE, NJ 07753-5143 US

Telephone: 201-774-3256

Cage: KO588

Ingredients

METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 80%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


BUTYLDIETHANOLAMINE,CAS#102-79-4

CAS: 102-79-4

RTECS: KK0525000

Fraction By Weight: 20%

Hazards

Effects of Overexposure:EYE:IRR;SKIN:IRR,DERMAT;SYSTEMIC
EFFECT:RESP.TRACT IRR,MAUSEA,VOMIT,INEBRIATION,BLINDNESS,CNS DEPRES

First Aid

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT
UNTIL VOMIT IS C LEAR. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.

Fire Fighting

Flash Point:54F
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:USE SCBA-USE WTR TO KEEP FIRE EXPSD CONT.COOL.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL SURF.&
OTHER IGN.SOURCES-AVOID SPREADING BURNING LIQ.W.COOLNG WTR.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT DURING CLEAN UP.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.
Other Precautions:AVOID INH.OF VAPORS-AVOID PERSONAL CONTACT W.THE
PRODUCT-SHOULD CONTACT BE MADE,REMOVE SATURATED CLOTHING & FLUSH
AFFECTED AREAS W.WATER.

Exposure Controls

Respiratory Protection:NIOSH APPVD RESP.OR GAS MASK WHEN TLV IS
EXCEEDED
Ventilation:MECH.(GENERAL)VENTIL;IF INADEQUATE,USE SUPPL.LOCAL EXHAUST.
Protective Gloves:IMPERMEABLE
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:EYE WASH;SAFETY SHOWER
Supplemental Safety and Health
PART D OF 5 PART KIT.KEY1:F2.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:148F,65C
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:<1(ETHER=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID,LITTLE IF ANY COLOR,CHARACTERIST.ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.